point data ADDE access?
point data ADDE access?
I have a point data ADDE server which I typically use commands like PTLIST and PTDISP to display the data in McIDAS-X in real-time. My files are actually point NetCDF files, but the ADDE server has a configuration file which makes them behave like MD files. I've created this remote ADDE server in Mc-V, but in the Data Explorer window, I cannot figure out how to access this data. On the left side, I see ways to display remote imagery via ADDE, but remote Gridded Data and Point sounding data points to URL's. How can one access the MD-like data remotely in Mc-V? Seems like something Mc-V should be able to do.
Re: point data ADDE access?
Kris -- I'm not sure what you are (not) seeing. In the attached screen-shot, I have ADDE servers being used for Point data...?
tom
tom
Re: point data ADDE access?
Hi Kris-
I tried some of our -X testing examples for the netCDF adde server and set them up remotely. When trying to access the datasets I'm getting errors like "DAY/TIME select clauses parameters nonexistent" and then "Point data server unable to resolve this dataset: JAY/null"
In -X, the netCDF point adde server has some limitations (especially with PTLIST) because it doesn't have the concept of a schema and a MD 'record.' You can't just PTLIST a record, you need to use PARAM= with a specific list of parameters for it to give some data back. With the -V ADDE point chooser, the problems with the netCDF adde server are moreso because it won't know how to resolve a time list of data available.
Also, the ADDE point chooser in -V is limited in the number of schema it can recognize. This has been written up in a couple different inquiries:
http://mcidas.ssec.wisc.edu/inquiry-v/?inquiry=940 (any schema)
http://mcidas.ssec.wisc.edu/inquiry-v/?inquiry=457 (GRET ARET satellite retrievals)
http://mcidas.ssec.wisc.edu/inquiry-v/?inquiry=424 (CLDS schema)
I have written up a new inquiry for your request because as we move forward we may want to serve netCDF files through adde in a different manner which may not fall under the schema type architecture:
http://mcidas.ssec.wisc.edu/inquiry-v/?inquiry=1525
If you have any more questions or comments, just let us know.
Thanks, Jay
I tried some of our -X testing examples for the netCDF adde server and set them up remotely. When trying to access the datasets I'm getting errors like "DAY/TIME select clauses parameters nonexistent" and then "Point data server unable to resolve this dataset: JAY/null"
In -X, the netCDF point adde server has some limitations (especially with PTLIST) because it doesn't have the concept of a schema and a MD 'record.' You can't just PTLIST a record, you need to use PARAM= with a specific list of parameters for it to give some data back. With the -V ADDE point chooser, the problems with the netCDF adde server are moreso because it won't know how to resolve a time list of data available.
Also, the ADDE point chooser in -V is limited in the number of schema it can recognize. This has been written up in a couple different inquiries:
http://mcidas.ssec.wisc.edu/inquiry-v/?inquiry=940 (any schema)
http://mcidas.ssec.wisc.edu/inquiry-v/?inquiry=457 (GRET ARET satellite retrievals)
http://mcidas.ssec.wisc.edu/inquiry-v/?inquiry=424 (CLDS schema)
I have written up a new inquiry for your request because as we move forward we may want to serve netCDF files through adde in a different manner which may not fall under the schema type architecture:
http://mcidas.ssec.wisc.edu/inquiry-v/?inquiry=1525
If you have any more questions or comments, just let us know.
Thanks, Jay
Re: point data ADDE access?
OK, I figured that this nontraditional NetCDF point data would be challenging. If I load the data locally via the General -> Files/Directories, it can display fine. If I had 20 files on my local machine, is there a way to pull them all together into an animation without having to display each one individually?
Re: point data ADDE access?
Removed, a better answer is posted below.
Last edited by joleenf on Wed Aug 07, 2013 1:57 pm, edited 2 times in total.
Re: point data ADDE access?
Hi Kris-
This is the process we used with metar netCDF files for our training tutorials:
- In the General Files chooser, highlight all the files you want to display (control + left-click), click Add Source
- Select Point Data under Fields
- Choose a layout model and Create Display
- Then in our example we'd adjust the Time Animation (in the Define Animation Times) since it would make a time step for every minute over 6 hours of data.
Hopefully this process would be useful for your type of data. If you have any questions or would like some extra detail, let us know.
Thanks, Jay
This is the process we used with metar netCDF files for our training tutorials:
- In the General Files chooser, highlight all the files you want to display (control + left-click), click Add Source
- Select Point Data under Fields
- Choose a layout model and Create Display
- Then in our example we'd adjust the Time Animation (in the Define Animation Times) since it would make a time step for every minute over 6 hours of data.
Hopefully this process would be useful for your type of data. If you have any questions or would like some extra detail, let us know.
Thanks, Jay